Click here to log in or

Author: Peter Rüegg, ETH Zurich

Aerogel is an extraordinary material that has set Guinness World Records many times, including being the lightest solid in the world.

Professor Markus Niederberger of the Multifunctional Materials Laboratory of ETH Zurich has been studying these special materials. His laboratory specializes in aerogels composed of crystalline semiconductor nanoparticles. "We are the only group in the world that can produce this aerogel with such high quality," he said.

One use of nanoparticle-based aerogels is as a photocatalyst. Whenever a chemical reaction needs to be activated or accelerated with the help of sunlight, they are used-an example is the production of hydrogen.

The material of choice for the photocatalyst is titanium dioxide (TiO2), a semiconductor. But TiO2 has a major disadvantage: it can only absorb the ultraviolet part of sunlight-about 5% of the spectrum. If photocatalysis is to be efficient and industrially useful, the catalyst must be able to utilize a wider wavelength range.

Broaden the spectrum with nitrogen doping

This is why Junggou Kwon, a doctoral student at Niederberger, has been looking for a new way to optimize aerogels made of TiO2 nanoparticles. She has a brilliant idea: if the TiO2 nanoparticle aerogel is "doped" (in technical terms) with nitrogen, the individual oxygen atoms in the material will be replaced by nitrogen atoms, and then the aerogel can absorb more visible Part of the spectrum. The doping process leaves the porous structure of the aerogel intact. Research on this method was recently published in the journal Applied Materials and Interface.

Kwon first used TiO2 nanoparticles and a small amount of precious metal palladium to produce aerogels. Palladium plays a key role in photocatalytic hydrogen production. Then she put the aerogel into the reactor and injected ammonia gas. This results in a single nitrogen atom being embedded in the crystal structure of the TiO2 nanoparticles.

Modified aerogel makes the reaction more efficient

In order to test whether the aerogel modified in this way actually improves the efficiency of the required chemical reaction-in this case, hydrogen is produced from methanol and water-Quan developed a special reactor, she Put the aerogel directly into it. Then, she introduced water and methanol vapor into the aerogel in the reactor, and then irradiated it with two LED lights. The gaseous mixture diffuses through the pores of the aerogel, where it is converted into hydrogen required for the surface of titanium dioxide and palladium nanoparticles.

Five days later, Kwon stopped the experiment, but until then, the reaction stabilized and continued in the test system. "This process may be stable for a longer time," Niederberger said. "Especially in industrial applications, it is important that it remains stable for as long as possible." The researchers are also satisfied with the results of the reaction. The addition of the precious metal palladium significantly improves the conversion efficiency: the use of palladium-containing aerogels produces 70 times more hydrogen than the aerogels without palladium.

The experiment mainly provides feasibility studies for researchers. As a new type of photocatalyst, aerogels provide a special three-dimensional structure and provide potential for many other interesting gas phase reactions besides hydrogen production. Compared with electrolysis commonly used today, the advantage of photocatalysts is that they can use only light instead of electricity to produce hydrogen.

Whether the aerogel developed by the Niederberger team will be used on a large scale is still uncertain. For example, there is still the problem of how to accelerate the flow of gas through the aerogel; at this moment, the extremely small pores obstruct the gas flow too much. "To run such a system on an industrial scale, we must first increase the airflow and improve the aerogel irradiation," Niederberger said. He and his team are already studying these issues.

Aerogel is a special material. They are very light and porous, and have a huge surface area: one gram of material has a surface area of ​​up to 1,200 square meters. Due to their transparency, aerogels have the appearance of "frozen smoke". They are excellent thermal insulation materials and are therefore used in aerospace applications and are increasingly used for thermal insulation of buildings. However, their manufacture still requires a lot of energy, so the materials are expensive. The first aerogel was made of silica in 1931 by the chemist Samuel Kistler. Further explore the new strategy of manufacturing 3D-MXene-based electrocatalysts to reduce nitrogen to ammonia. More information: Junggou Kwon et al. Gas-phase nitrogen doping of monolithic TiO2 nanoparticles-gas for efficient visible light-driven photocatalytic hydrogen production Gel, ACS Applied Materials & Interfaces (2021). DOI: 10.1021/acsami.1c12579 Journal information: ACS Applied Materials and Interfaces

ETH Zurich provides a citation: New photocatalysts can achieve more efficient hydrogen production (2021, December 2) Retrieved on December 6, 2021 from https://phys.org/news/2021-12-photocatalyst- enable-efficient-hydrogen-production.htmlThis document is protected by copyright. Except for any fair transaction for private learning or research purposes, no part may be copied without written permission. The content is for reference only.

More from high energy, nuclear, particle physics

If you encounter spelling errors, inaccuracies, or want to send an edit request for the content of this page, please use this form. For general inquiries, please use our contact form. For general feedback, please use the public comment section below (please follow the guidelines).

Please select the most suitable category to facilitate the processing of your request

Thank you for taking the time to provide feedback to the editor.

Your feedback is very important to us. However, due to the large volume of messages, we do not guarantee a separate reply.

Your email address is only used to let the recipient know who sent the email. Neither your address nor the recipient's address will be used for any other purpose. The information you enter will appear in your email, and Phys.org will not keep it in any form.

Send weekly and/or daily updates to your inbox. You can unsubscribe at any time, and we will never share your details with third parties.

Medical research progress and health news

The latest engineering, electronic and technological advancements

The most comprehensive technology news report on the Internet

This website uses cookies to assist in navigation, analyze your use of our services, collect data for advertising personalization, and provide content from third parties. By using our website, you acknowledge that you have read and understood our privacy policy and terms of use.