Gw Carbide-Boron carbide sandblasting nozzle with aluminum sheath

Grewin supply sandblast nozzles with regular types of straight bore and venturI bore, such as boron carbide nozzles, silicon carbide nozzles, tungsten carbide nozzles and ceramic ones.1. Boron carbide sand blasting nozzles, they have a service life 4-7times of sintered tungsten carbide nozzles, but their shock resistan

Featured Products

Grewin supply sandblast nozzles with regular types of straight bore and venturI bore, such as boron carbide nozzles, silicon carbide nozzles, tungsten carbide nozzles and ceramic ones.

1. Boron carbide sand blasting nozzles, they have a service life 4-7times of sintered tungsten carbide nozzles, but their shock resistance is not as that of sintered carbide nozzles, so are suitable to serve under wear, stable atmospheric pressure and medium shock.
Specification:
Grind resistant, do not active with acid, low & high temperature resistance,
The density> =2.46g/cm3;
Hardness> =3500kgf/sqm, bending resistance: ≥ 400Mpa
Melting point: 2450degree
And now boron carbide nozzle is instead of hardness alloy, Tungsten carbide nozzle, silicon carbide sandblasting nozzle.
The working life of boron carbide nozzle is 500-1000H
The size can be customized as per drawing

2.  sintered tungsten carbide, products including various sand blasting nozzle, high-pressure water spray nozzle, high-pressure water cutting nozzle, bars, sheets, sealing rings, punching die blocks, glass cutters, etc.
We are able to produce tubes with diameter of 200mm and length of 300mm, for rings, size can be diameter up to 320mm and length to be 200mm.

3.advantages on Tungsten carbide sand blasting nozzles :

1. very high hardness.
2. stable working effort during blasting.
3. long sizes are accetable.
4. very good prices with quite fast delivery.
5. special sizes with drawing are acceptable.

4.Grade Recommend of Tungsten carbide sand blasting nozzles 
GradeEqual to ISO Category Number          PerformanceUses
DensityBend StrengthHardness
G/Cm3N/mm2HRA
YG3K0114.9-15.31180≥90.5sand-blasting nozzlesQualified for fine turning and half-fine turning when cast iron, non-ferrous metal, alloys as well as non-alloy materials cutting consecutively. Can make wire drawing of steel and non-ferrous metal. Also qualified for sand-blasting nozzles.
YG3XK0115.1-15.4≥1300≥91.5
YG6XK1014.8-15.1≥1560≥91.0Qualified for machining of chilled cast iron, alloy cast iron, refractory steel and alloy steel. Also Qualified for the machining of common cast iron.
YG6AK1014.7-15.1≥1580≥91.0
YG6K2014.7-15.1≥1670≥89.5Qualified for finish machining and semi-finish machining for the cast iron, non-ferrous metal, alloy and unalloyed materials. Also qualified for wire drawing for the steel and non-ferrous metal, electric drill for geology use and steel drill etc.
YG8K20-K3014.6-14.9≥1840≥89Qualified for rough machining of cast iron, non-ferrous metal, nonmetal materials, drawing of steel, non-ferrous metal and pipes, various drills for geology use, tools for machine manufacture and wearing parts

5. Silicon carbide sand blasting nozzles have middle wear resistance and anti-shock ability compared with boron carbide and tungsten carbide, and much lighter than tungsten carbides.



6.Estimated service life of nozzles(In hours) 

Nozzle Material
 

Steel Grit/Shot
 

Sand
 

Aluminum Oxide
 

Alumina
 

20-40
 

10-30
 

1-4
 

Tungsten Carbide
 

500-800
 

300-400
 

20-40
 

Silicon Carbide
 

600-1000
 

400-600
 

50-100
 

Boron Carbide
 

1500-2500
 

750-1500
 

200-1000
 

7. Products Show









Gw Carbide - Boron Carbide Blasting Nozzles with Aluminum Jacket
Gw Carbide - Boron Carbide Blasting Nozzles with Aluminum Jacket
Gw Carbide - Boron Carbide Blasting Nozzles with Aluminum Jacket
Gw Carbide - Boron Carbide Blasting Nozzles with Aluminum Jacket




waiting for your ealry contact and inquiries here!
 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours