We use cookies to enhance your experience. By continuing to browse this site you agree to our use of cookies. More info.

In a study published in Materials Today: Proceedings, the impact of adding nanoscale SiO2 fillers to kenaf fiber polymeric composites on mechanical properties is investigated. The polymers' compressive, tensile, and impact characteristics were examined.

Study: Investigating mechanical strength of a natural fibre polymer composite using SiO2 nano-filler. Image Credit: Photobank.kiev.ua/Shutterstock.com

Due to the rising appreciation of the need to utilize legitimate resources to replace those created by conventional materials, natural fiber is increasingly being employed as a support or filler element in fabricating composites.

Natural fibers offer a variety of desirable characteristics, including minimal price, sustainability, good mechanical capabilities due to their lower density, and simplicity of treatment thanks to their non-abrasive nature, which enables higher levels of packaging.

Furthermore, natural fibers have grown in favor as a reinforcement element over the past few decades due to their environmentally friendly and limitless properties, lightweight nature, and ease of production.

Artificial polymer composites are difficult to dispose of, and the use of plastic has been restricted in multiple countries. As a consequence, the need for natural fibers has increased across a wide range of businesses.

Natural fibers are usually made of lignocellulose biomass and possess a high moisture absorption capability, making them appropriate for a wide range of interior purposes such as furnishings, seismic attenuations, packing.

Nonetheless, in terms of mechanical strength, organic fibers still lag behind synthetic fibers significantly.

To achieve the same strength as synthetic fibers, they must undergo a range of chemical processes, hybridizing by using organic and synthetic fibers and interweaving them into many configurations.

Furthermore, the limitations of using reinforcement organic fiber filler elements include their poor adhesion to the matrix due to the fiber's hydrophilic nature and the matrix's murky nature. Consequently, a sub-par fiber-matrix connection is formed, decreasing the strength effect of the fiber and inhibiting force transfer between fibers and matrix material.

The quantity of binding between the polymeric composite matrix and the fibers determines the properties of natural fiber polymer matrix composites.

Historically, chemical approaches have been employed to modify the properties of fibers. Solvents that are organic in nature, such as alkali-based compounds, silane, peroxides, isocyanates, as well as polymer coupling agents, are widely used.

Another method for enhancing the properties of natural fiber reinforced composites is to include particle or powder form filler elements into matrices.

The appropriate combination of matrix elements, fillers, and reinforcement materials may produce a composite with equivalent or even greater properties than typical composite alloys.

In commercial and industrial applications, the use of particle filler materials with polymers is becoming increasingly common.

Fillers are added to polymers to improve their process capability, stiffness, and durability. To address polymer restrictions such as weak stiffness and to utilize them in a variety of applications, synthetic fillers such as silica, alumina, carbon, titania, and fly ash particles in the form of nanoscale particles are routinely used in combination with matrices for forming polymeric nanocomposites.

It is feasible to improve the properties of natural/synthetic fiber composite materials by modifying the matrix using nano-SiO2 filler.

This work aims to experimentally explore the tensile and compressive strength of kenaf fiber reinforced epoxy composite at varied levels of nano-SiO2 filler loading.

A compression molding machine was used to make the composite plates.

The impact of disbanding nano-SiO2 fillers on the mechanical properties of kenaf fiber epoxy composite was examined by the research team.

In composite, the mass fraction of nano-filler was selected to be 0%, 1%, 2%, 3%, and 4%.

The highest tensile strength of the composite was found with 2% nanofiller, which was substantially greater than that of the regular composite.

Similarly, nano-SiO2 fillers at 2% mass in composites improved compressive and impact strengths. Overall, the 2 percent fraction of nano-SiO2 filler was shown to be the optimal content in the kenaf fiber epoxy composite.

Continue reading: Sustainable Recovery of Rare Earth Elements with Cellulose Nanocrystals

Jotiram, G. A., Palai, B. K., et al. (2022). Investigating mechanical strength of a natural fibre polymer composite using SiO2 nano-filler. Materials Today: Proceedings. Available at: https://www.sciencedirect.com/science/article/pii/S2214785322002048?via%3Dihub

Disclaimer: The views expressed here are those of the author expressed in their private capacity and do not necessarily represent the views of AZoM.com Limited T/A AZoNetwork the owner and operator of this website. This disclaimer forms part of the Terms and conditions of use of this website.

Shaheer is a graduate of Aerospace Engineering from the Institute of Space Technology, Islamabad. He has carried out research on a wide range of subjects including Aerospace Instruments and Sensors, Computational Dynamics, Aerospace Structures and Materials, Optimization Techniques, Robotics, and Clean Energy. He has been working as a freelance consultant in Aerospace Engineering for the past year. Technical Writing has always been a strong suit of Shaheer's. He has excelled at whatever he has attempted, from winning accolades on the international stage in match competitions to winning local writing competitions. Shaheer loves cars. From following Formula 1 and reading up on automotive journalism to racing in go-karts himself, his life revolves around cars. He is passionate about his sports and makes sure to always spare time for them. Squash, football, cricket, tennis, and racing are the hobbies he loves to spend his time in.

Please use one of the following formats to cite this article in your essay, paper or report:

Rehan, Shaheer. (2022, January 25). Performance of Natural Polymer Composites with Nano-SiO2 Filler. AZoNano. Retrieved on August 20, 2022 from https://www.azonano.com/news.aspx?newsID=38577.

Rehan, Shaheer. "Performance of Natural Polymer Composites with Nano-SiO2 Filler". AZoNano. 20 August 2022. <https://www.azonano.com/news.aspx?newsID=38577>.

Rehan, Shaheer. "Performance of Natural Polymer Composites with Nano-SiO2 Filler". AZoNano. https://www.azonano.com/news.aspx?newsID=38577. (accessed August 20, 2022).

Rehan, Shaheer. 2022. Performance of Natural Polymer Composites with Nano-SiO2 Filler. AZoNano, viewed 20 August 2022, https://www.azonano.com/news.aspx?newsID=38577.

Do you have a review, update or anything you would like to add to this news story?

In this interview, we discuss a nanoparticle ink used to produce low-cost printable perovskite solar cells, helping to catalyze the technology transition toward commercial viable perovskite-based devices.

We speak with researchers behind the latest advancement in graphene hBN research that could boost the development of next-generation electronic and quantum devices.

AZoNano speaks with Dr. Laurene Tetard from the University of Central Florida about her upcoming research into the development of nanotechnology that can detect animal-borne diseases. The hope is that such technology can be used to help rapidly control infected mosquito populations to protect public

The Filmetrics R54 advanced sheet resistance mapping tool for semiconductor and compound semiconductor wafers.

This product profile describes the latest nano-particle analyzer "thesis particle size analyzer" and its key features.

The Filmetrics F40 turns your benchtop microscope into an instrument for measuring thickness and refractive index.

AZoNano.com - An AZoNetwork Site

Owned and operated by AZoNetwork, © 2000-2022